Quick shifter Batteryless for PVL Ignition
(Only PVL/Selettra 464 228 & 105 458 models)
The Quick shifter is an electronic device that allows, in the fast sporting use of the vehicle, to engage the upper gear without closing the gas and without using the clutch. It also DOES NOT require any external power supply thanks to a Batteryless Hardware solution that can be applied to all single-cylinder Carburetor engines with PVL ignition. The configuration is manual by microswitch selectors, therefore no external device such as PC or SmartPhone is required. The control unit is water-resistant ABS plastic (NOT FOR IMMERSION) and vibrations thanks to the full inside resin coating of the electronic board . Harness and connectors are designed for Motorsport applications, thus making the device resistant to engine temperatures, oil and hydrocarbons as well as water spray even under pressure.
It is possible to configure the only Cut-Off time from 22 to 70 milliseconds with an accuracy of 2 milliseconds through 10 microswitches selectors.
The kit consists of a single electronic control unit (eBox EQS), an electromechanical sensor to be applied directly on the gear lever and a Plug & Play wiring connecting to the ORIGINAL electrical system of the vehicle.
Find out here the advantages you can get by installing an SP Electronics quick shifter
-
SP-Christmas Gift Voucher €50+€50
During the Christmas period we are giving all our users the opportunity to treat themselves or give away a €100 voucher (50 voucher purchase + 50 euro discount that we…
-
Quick Shifter EQS PVL Kit with OFFROAD sensor for single-cylinder Carburetor 2T/4T engine
Applicable on all Offroad / Supermoto / PitBike models with single-cylinder Carburetor engines. Supplied with Offroad sensor for applications directly on the gear lever, specific for each make and model…
-
Quick Shifter EQS PVL Kit with TOE PEG sensor for single-cylinder carburetor 2T/4T engine
Applicable on all PitBike models with single-cylinder Carburetor engines. Supplied with Toe Peg sensor for applications directly on the gear lever, specific for reverse gear user.
-
Quick Shifter EQS PVL Kit with bidirectional (Push or Pull) sensor for single-cylinder Carburetor 2T/4T engine
Applicable on all single-cylinder 2T / 4T Carburetor engines. Supplied with bidirectional sensor Push or Pull, for Tie rod applications (Tie rod not supplied in the kit but available…
-
Quick Shifter EQS PVL Kit with PUSH sensor for single-cylinder Carburetor 2T/4T engine
Applicable on all single-cylinder 2T / 4T Carburetor engines. Supplied with a mono-directional PUSH sensor for applications on Tie rod (Tie rod not supplied in the kit but available…
-
Quick Shifter EQS PVL Kit with PULL sensor for single-cylinder Carburetor 2T/4T engine
Applicable on all single-cylinder 2T / 4T Carburetor engines. Supplied with a mono-directional PULL sensor for applications on Tie rod (Tie rod not supplied in the kit but available…
-
Quick Shifter EQS PVL Kit with bidirectional (Push or Pull) sensor for twin-cylinder Carburetor 2T/4T engine
Applicable on all twin-cylinder 2T / 4T Carburetor engines. Supplied with bidirectional sensor Push or Pull, for Tie rod applications (Tie rod not supplied in the kit but available…
-
Quick Shifter EQS PVL Kit with PUSH sensor for twin-cylinder Carburetor 2T/4T engine
Applicable on all twin-cylinder 2T / 4T Carburetor engines. Supplied with a mono-directional PUSH sensor for applications on Tie rod (Tie rod not supplied in the kit but available…
-
Quick Shifter EQS PVL Kit with PULL sensor for twin-cylinder Carburetor 2T/4T engine
Applicable on all twin-cylinder 2T / 4T Carburetor engines. Supplied with a mono-directional PUSH sensor for applications on Tie rod (Tie rod not supplied in the kit but available…